Automatic Voltage Protector System Power Voltage Protector AVS 45A

Name: Automatic Voltage  protector system for  whole home 

Model NO:JL-VPDB8000 
 
With teminal   

1.three  year warranty

2.Best quality and price

3.OEM&ODM offered for 9 years

It is an voltage protection with LED DISPLAY ; we cand set the voltage range by hand according our need;
 which protects and extends the servicelife of connected electrical equipment (TV,Telephone,etc.)safe .
. When voltage is higher or lower than  voltage range , it  cut off to protect the equipment  safe 
 

Specifications:

Working voltage : 220VAC; 50HZ /110V 60HZ 
Working current: MAX 45A Delay time : 5~999s
      Voltage  adjust low limit : 140 ~ 210VAC; Voltage adjust high limit : 230~ 260VAC
Or  Voltage  adjust low limit : 70 ~ 100VAC; Voltage adjust high limit : 120~ 150VAC

Setup instruction : 1. press set key 3 seconds enter setup progrem . show H245 , press Set key to choose each menu circulate .entered menu , respectively are HIGH VOLTAGE/LOW VOLTAGE/DELAY TIME press ∧or∨ key to setup each parameter . discharge from ∧ or ∨ key for 3 seconds in setup state . when exit ,LCD show to auto save revised parameter and enter normal state. 2. parameter setup : High voltage setup : press select key 3 seconds, LCD show H245 , press ∧
key to choose RISE ,∨ key to choose DOWN. The high voltage from 230 to 260 *Low limiter setup : press select key 3 seconds LCD show H2XX ,quick press Set key one more time ,LCD show L175 ,press ∧or∨ key to revise low limiter . system will working as new set . * Delay time setup: press select key 3 seconds LCD show H245 ,quick press Select key twice again ,LCD show D180 ,press ∧or ∨ key to revise delay time . system will working as new set . 3. back default setting : Press DEF key: press DEF key 1 second, system back to default setting .LCD show "dEE" ,then parameter show "DEF_H245_L175_D020 JLDB" , the all parameter back to default.
Working instruction : 1. on, show JLDB ,then run into delay time 20s, LCD show current voltage. 2. socket set on ,if the voltage between Low_limter±5v ~ Hi_limite±5v , in delay time state .LCD show the leaving delay time ; delay time finished ,green light on, enter normal state ,LCD show the voltage .SAVE
3. socket set on ,if voltage lower than Low_limter+5V or high than Hi_limter, protect state.